WPC Solid Moulded Doors

WPC Solid Moulded Doors

Our Wpc Doors are made from superior quality of Wood Polymer Composite (WPC) which is one of the strongest polymer composition of WPC Industries. The Greatest advantages of our factory made door is its natural resistance to extreme environments which makes it a class apart from the other types of ordinary doors.

Our WPC Moulded Doors are made from superior quality of Wood Polymer Composite (WPC) which is one of the strongest polymer compositions of WPC Industries. We are the only one in India who is manufacturing Direct Moulded WPC Doors with high impact strength and very smooth surface, without any roughness on doors. There is no CNC and routing work involve on our doors, Its Direct Moulded Door with smooth surface. Any types of paint can be done on it later on with smooth surface.

Available Size (MM) :-

  • 25 mm
  • 28 mm
  • 30 mm
  • 35 mm

Available Length (Inch) :-

  • Width : 26", 28", 30", 32", 34", 36", 38".
  • Length : 75", 78", 81" 84".

Applications of WPC Solid Moulded Door

  • Main Door
  • Bedroom Door
  • Living Room Door
  • Bathroom Door
  • Toilet Door
  • Office Door
  • Partition Door
  • Industrial Door
  • Pre-Fab House Door

Recommendation:

Rajvi Wpc Door doesn't require Special tools to work. Only Conventional carpenter's tool will sufficient for work and Process.

  • Recommended Tools: Drilling machine, Hacksaw Blade, Saw, Hammer / Mallet, Pliers, Snips, Chisel and Woodworking square.
  • Recommended Adhesive: Cement Solvent Adhesive (WPC to WPC), Silicon Based Adhesive (WPC to Laminate), Silicon Based Wood Adhesive (WPC to Veneer).
  • Recommended Accessories: Screws, European Series Hinges, L-Hinges/But Hinges/Ordinary Hinges and Wax Filler.


Technical Property for Rajvi WPC Doors

Technical Properties Index
Material Wood Polymer Composite (WPC)
Material Composition PVC, Wood Powder, CaCo3, Other Additives
K Value 57 - 60 (Suspension Grade)
Material Density 570 - 650 Kg/cm3
Water Absorption Ratio ≤ 0.5%
Tensile Strength ≥ 11 (MPa)
Surface Shore D Hardness 0.55 to 0.70 (g/cc)
Elongation strength ≥10 (MPa)
Elongation rate of break ≥15
Impact strength of free beam ≥10 (kjm2)
Softening Point ≥70 (C°)
Charpy Impact Strength ≥ 15 (KJ/M²)
Flexural Strength ≥ 15 (MPa)
Compressive Strength at 10% Deformation > 3.0 (MPa)
Thermal Vicat Softening Temperature ≥ 75 (Cº)
Thermal Vicat Deflection Temperature @ 1.8 MPa 60 (Cº)